Use This Code at Checkout and Get 10% Off


How to Make a Spoon Ring?

How to Make a Spoon Ring?

Nowadays both men and women love to wear adjustable rings. If you are a jewelry lover you can design your own spoon rings by using a spoon. 

Drawing inspiration from the techniques used to craft coin rings, this method requires precision, creativity, and a set of tools readily available for any DIY enthusiast. Follow the detailed steps below to master the process of making your very own spoon ring, turning an everyday utensil into a wearable piece of art.

Gathering Tools and Materials

Before starting the  creative process, ensure you have all the necessary tools and materials at your disposal. The key tools include a ring mandrel or drift pin, a piece of plastic conduit pipe, a soft-faced plastic/vinyl hammer, a blowtorch, caliper, center punch, drill, step drill bit, pliers, belt sander (optional) or file, Dremel with a cutoff wheel (optional) or hacksaw, various grits of sandpaper (ranging from 150 to 1500), metal polish, and, of course, a silver spoon.

Creating the Ring Blank

The initial step involves crafting a ring blank that will serve as the foundation for your spoon ring. Begin by flattening the spoon gently with a soft-faced hammer on a piece of wood. Simultaneously, anneal the spoon by carefully heating it with a blowtorch and quenching it in water. This process makes the metal more pliable and eases stress accumulated during work hardening.

Trace the outline of a quarter onto the flattened spoon and mark the center of the circle using half the diameter of the quarter. Employ a center punch to mark the center and drill a pilot hole. Gradually enlarge the hole to approximately 3/8" using a step drill bit. Clean up the hole with a file, ensuring a smooth surface, and proceed to cut out the circle using a Dremel or hacksaw.

If a belt sander is available, use it to refine the edges. Otherwise, a file can be used to achieve the same results. To perfect the circular shape of the blank, use a makeshift lathe made from a drill bit and tape, spinning it on sandpaper to smooth out any imperfections.

Shaping the Ring

Place the sterling silver adjustable ring blank on the ring mandrel, using a drift pin if the hole is initially too small. Begin tapping gently around the ring blank, rotating it periodically. This process gradually bends the metal around the mandrel. Periodically reheat the metal with a blowtorch and quench to anneal, making it more malleable.

Continue working the metal evenly around the mandrel, taking your time to ensure a consistent shape. If the metal crinkles, proceed slowly, as it will eventually smooth out. Once the ring starts taking shape, flip the blank and work it down on the mandrel using the same tapping technique.

To size the ring, use a piece of plastic conduit pipe and a hammer, tapping on the edge of the ring to force it down further on the mandrel. Ensure equal sizing on each side to prevent deformation. Repeat this process until you achieve the desired size.

Optional - Doming Block

For an added touch, use a doming block to give the ring a rounded edge. Place the ring in the block and, using a vice, squeeze the ring into the desired shape. Keep in mind that oversizing the ring is necessary, as this step reduces its size.

Final Sanding and Polish

To bring out the true beauty of your spoon ring, engage in the final steps of sanding and polishing. Secure the ring on a drill using a round piece of aluminum and tape, allowing for easy rotation. Begin sanding with fine grits of sandpaper, progressively working your way up to 1500. To achieve a dazzling shine, use metal polish and a cloth, exercising caution to prevent the cloth from catching in the drill.

Wrap up

Crafting a spoon ring is a meticulous yet rewarding process that transforms a simple utensil into a personalized and stylish accessory. By following these detailed steps and exercising patience and precision, you can create a unique piece of jewelry that not only showcases your craftsmanship but also repurposes everyday items into wearable art. 


Do spoon rings tarnish?

Yes, spoon rings can tarnish over time. Tarnishing is a natural process that occurs due to the reaction of the silver with elements in the air, especially sulfur. To prevent tarnishing, you can store your spoon ring in a jewelry box or an airtight container when not in use. Regular cleaning and polishing with a silver polishing cloth or a specific silver cleaner can also help maintain the luster of your spoon ring.

Can you make spoon rings with stainless steel?

While traditional spoon rings are made from silver, stainless steel can also be used to make rings. However, the process may differ as stainless steel is a harder material than silver. It might require specialized tools and techniques, and the resulting ring may have a different aesthetic compared to silver spoon rings. Keep in mind that the malleability of stainless steel may make the process more challenging.

What finger do you wear a spoon ring on?

Sterling silver spoon rings are versatile and can be worn on various fingers. The most common fingers are the index, middle, or ring finger. The choice of finger often depends on personal preference and comfort. Some people prefer wearing spoon rings on their index or middle fingers for a bold statement, while others may choose the ring finger for a more traditional look. Ultimately, there are no strict rules, allowing you to express your style and creativity.

Are spoon rings in style?

Yes, spoon rings have made a resurgence in style and are considered fashionable accessories. Their unique and handcrafted appearance adds a touch of individuality to one's jewelry collection. Many people appreciate the vintage and upcycled nature of spoon rings, making them a trendy choice for those who value sustainability and craftsmanship. As with any fashion trend, personal style plays a significant role, and spoon rings offer a distinctive and meaningful accessory for those looking to stand out.

Leave a comment